I know I’m not alone. You suddenly remember a “fill in the blank” party and need a card. You go to your stash and you have everything in the world there EXCEPT the kind of card you need.

I found myself in that situation Saturday. My husband and I wanted to attend a graduation party for one of the young men in our church and I had no card that was suitable for this. Off to the craft room I went with one hour to create a card before I needed to head out the door. Sometimes my best cards are made with me in a time crunch and this one is no exception. 

I used things from my stash for this project and I’m pretty please with the outcome.

Products Used:

Sizzix Black Card stock: https://shrsl.com/435df (this is not the exact pack of card stock that I have but it’s the same black card stock.) 

Gold Glitter Card Stock from Pink and Main: https://shrsl.com/435dh

Gold Star Cheer Foil from Pink and Main: https://shrsl.com/435do

Stitched Oval Dies: https://shrsl.com/435dy (Again, this is not the set I used but I could not find the set I have. These are comparable.)

Art Glitter Glue: https://bit.ly/3JorlGt

Dress My Craft Trim & Score Board: https://bit.ly/3qDHsb3 

We R Memory Keepers Guillotine Trimmer: https://shrsl.com/435e5

We R Memory Keepers Mini Laser Square: https://bit.ly/3IKEefV

Teflon Bone Folder: https://shrsl.com/435e6

Brutus Monroe Alabaster White Ink: https://shrsl.com/435ea

Cutting instructions:

• Cut a black card base to 4 1/4 x 11 and score at 5 1/2. This will make a side folding landscape US A2 card.
• Cut a Gold Glitter panel to 4 x 5 1/4
• Cut a black card panel to 3 3/4 x 5
• Using the oval die, cut a black oval for the focal point of the card.

For a full tutorial, please see my YouTube Video: 

Hey y’all. I’m so happy you stopped by. Today, I’m creating three cards using the August 2022 Box of the Month from Not2Shabby. Run…RUN I said…over to the Not2Shabby Shop and pick up this box of the month. It is STUNNING!

Here’s the link to the box of the month: https://www.not2shabbyshop.com/Box-of-the-Month_p_15643.html?affid=58

Head over to the Not2Shabby Shop and check out all the great goodies in the shop! Be sure to use this 10% off coupon – good on almost everything in the shop. Use code Jamie for 10% off of your order. https://www.not2shabbyshop.com/?AffId=58

After visiting each stop on the hop, they must complete their entry through Rafflecopter
http://www.rafflecopter.com/rafl/display/eeeaf7f330/? Giveaway closes August 7th @ 11:59 p.m. The winner will be announced on August 8th on the N2S YouTube Channel. One winner will receive a $25 gift card to the Not 2 Shabby Shop.

Cutting Guide:

3 US A2 card bases in Kraft (mine were all side folding landscape cards)

Brown and black cardstock for chicken wire die – 4 ¼” x 5 ½”

Yellow Polka dot for card #2 – 4” x 5 ¼”

Yellow polka dot for card #3 – 3” x 3”

Black gingham for card #3 – 4” x 5 ¼” & 2 ½” x 3”

Supplies Used:

N2S Box of the Month – Fall Sunshine https://www.not2shabbyshop.com/Box-of-the-Month_p_15643.html?affid=58 .

Memento Tuxedo Black Ink: https://bit.ly/3gQkY3g

Misti Stamping Tool: https://bit.ly/3xtMb1W

Dress My Craft Stitched Circle Die Set: https://bit.ly/3qK2iFB

Dress My Craft Square Family Die Set: https://bit.ly/3oHRDee

X-Press It Blending Card: https://bit.ly/3wlxHDc

Art Glitter Glue: https://bit.ly/3d7huH1

• I use affiliate links when possible, using these links to purchase awards me a small commission. Items used in this video are all purchased by me, if and when an items is sent to me I will denote that by using ** next to the item.

https://youtu.be/eZ2bywzlxgg

Hey y’all. I’m so happy you stopped by. Today’s project is part of a collaboration with some other members of the N2S Design Team using the Some of the July N2S products. I’m showcasing the July 2022 Stamp of the Month, Beary Christmas.

Head over to the Not2Shabby Shop and check out all the great goodies in the shop! Be sure to use this 10% off coupon – good on almost everything in the shop. Use code Jamie for 10% off of your order. https://www.not2shabbyshop.com/?AffId=58

Cutting Guide:

Brutus Monroe Scarlet Cardstock:

                Base: 8 ½” x 4 ¼ “ – score at 5 ½”

                Notecard base: 8” x 3”, score at 4”

Brutus Monroe Jurassic Cardstock:

Base outside mat: 2 ¾” x 4”

                Base inside mat: 4 x 5 ¼”

                Notecard mat: 2 ¾” x 3 ¾” (cut 2)

Pattern paper:

                Base inside: 3 3/4l x 5”

                Base outside: 2 ½” x 3 ¾”

X-Press It Cardstock:

                2 ½” x 3 ½” (cut 2)

Supplies Used:

N2S Stamp of the Month – Beary Christmas: Unfortunately, this stamp is no longer in stock.

Memento Tuxedo Black Ink: https://bit.ly/3gQkY3g

X-Press It Blending Card: https://bit.ly/3wlxHDc

Delicata silver ink: I bought mine at Michael’s.

Brutus Monroe Cardstock in Jurassic and Scarlet: https://bit.ly/2UqmTm0

Art Glitter Glue: https://bit.ly/3d7huH1

DCWV Joyful Christmas: This is from my stash and I couldn’t find a link for it currently. Use whatever Christmas paper you have in your stash.

Do you want to support more videos at Kim Dixon Creative? Here’s how you can help:

• Subscribe, comment, like, and share my videos.
• I use affiliate links when possible, using these links to purchase awards me a small commission. Items used in this video are all purchased by me, if and when an items is sent to me I will denote that by using ** next to the item.

Hey y’all! I’m so happy you are here today. I have a project today for Not2Shabby. I’m using items from the February Box of the Month called Spring Things. There are so many fabulous items in this box and as of the posting of this blog, it is still available over at the Not2Shabby Shop. Also, the stencil and the ephemera pieces I used are available, at the time of posting, at the shop as well. I’ll link them below.

Supplies needed:

Accent Opaque 80 lb white cardstock – 4 ¼” x 5 ½” – https://amzn.to/34bDL51

Accent Opaque 80 lb white cardstock – card base cut to 4 ¼” x 11”, scored at 5 ½”  https://amzn.to/34bDL51

Not 2 Shabby Box of the Month – https://bit.ly/3G6K0Ff

Spring Border Stencil from the Box of the Month – https://bit.ly/3HLpbQJ

Ephemera Pieces from the Box of the Month – https://bit.ly/3GGLCVH

Sequin Mix from the Box of the Month –

Tim Holtz Distress Oxide Ink – Kitsch Flamingo – https://shrsl.com/3drcr

Blending Brush

Brutus Monroe Stick & Stamp Mat – https://shrsl.com/3drcs

Misti Stamping Platform – https://bit.ly/33f1WPN

We R Memory Keepers Mini Guillotine Paper Trimmer – https://shrsl.com/3drcw

Art Glitter Glue – Not available yet

Tim Holtz Craft Pick – https://shrsl.com/3drcy

Marvy Jewel Picker – https://shrsl.com/3drcz

Scotch Double Sided Foam Mounting Tape – https://bit.ly/3uW7HKd

Cutter Bee Scissors – https://bit.ly/2R1cImj

Ink on 3 Black Out Ink – https://bit.ly/3BemLrk

1. Remove the pad from the Misti Stamping Platform and place the Brutus Monroe Stick & Stamp Mat inside the Misti. Center the Accent Opaque 80 lb panel to the center of the sticky mat.
2. Place the Spring Borders stencil over the card panel ¼” above the card panel and blend the Kitsch Flamingo ink over the solid eggs.
3. Move the stencil down ¾” and blend again using the Kitsch Flamingo. Repeat until you have the card panel covered in pink Easter Eggs.
4. Find the Ephemera pieces in the ephemera pack that you wish to use on your card. Adhere the Easter Eggs at the center of the card panel toward the bottom.
5. Using Scotch Double Sided Foam Mounting Tape, adhere the gnomes on each side of the eggs.
6. Stamp the sentiment “I’m All Ears” on a strip of white cardstock and trim it out with a banner end. Adhere it to the card using the foam tape.
7. Adhere 5 sequins of differing sizes to the card front from the top left down to the bottom right corner.
8. Adhere the finished card panel to your card base.

Thanks for stopping by! I hope you enjoyed the card. I hope I’ve inspired you to play with paper!

One of my sweet crafty friends, Monica Taylor of taylormadecards4u, is celebrating a monumental mark on her YouTube channel. She has reached over 7,000 subscribers! Wowza! I can only imagine her excitement. To celebrate a few of her crafty friends are having a Celebration hop. This is my submission in the hop.

Click this link to visit Monica’s YouTube channel: https://www.youtube.com/c/MonicaTaylormadecards4u

Supplies needed:

Kraft cardstock for an A2 top folding card base

Mrs. Darcy – Digital Kit from taylormadecards4u.com

Tim Holtz Vintage Photo Distress Oxide Ink

Ranger – Tim Holtz – Blending Tool

Ranger – Tim Holtz Mini Ink Blending Foam

Scotch Double Sided Foam Mounting Tape

Art Glitter Glue

Ideology – Tim Holtz Word Bands

Ideology – Tim Holtz Mini Gears

Tim Holtz Craft Pick

Cutter Bee Scissors

Cutting Guide:

Card Base – Kraft Cardstock – 4 ¼” x 11” – score along the 11”  side at 5 ½”

Background piece from the Mrs. Darcy digital Kit

Various other ephemera from the Mrs. Darcy Digital Kit

1. Trim background piece to 4” x 5 ¼” and ink the edges with Vintage Photo distress oxide ink.

2. Feed the ribbon through the Tim Holtz Word Band and adhere to the bottom portion of the background trimmed above.

3. Using Scotch Double Sided Foam Mounting Tape, adhere the background piece to the A2 card base.

4. Adhere the other various ephemera from the digital kit to the front of the card after inking the edges with Vintage Photo distress oxide ink.

5. Adhere the metal gears in a triangle on the card front.

6. Choose a small image to fussy cut and ink the edges. Adhere this to the bottom corner of the inside of the card.

7. Now, the most important step…sign this card and send it off to one of your best gal pals to celebrate her!

Hey y’all. Welcome to my site! I’m so glad you took the time to stop by and click around. Don’t hesitate to use the Contact Me tab to email me any questions you might have or suggestions for new videos!

You’ll find mostly paper crafting here…but you also may find some sewing tutorials, general crafting…who knows!!!